查看完整版本: tx2无法粘帖配置

tx2无法粘帖配置

[url=http://www.one-tom.com/bbs/mailto:yixun@SCC-GD-SZ-XNT-MAN.RE0]yixun@SCC-GD-SZ-XNT-MAN.RE0[/url]# load merge terminal relative

[Type ^D at a new line to end input]
routing-instances
{
    CN2_traffic {
currently editing the configuration:
  yixun terminal p2 (pid 3574)
on since 2007-12-04 06:32:41 GMT, idle
01:46:27
      {master}[edit]
  yixun
terminal p3 terminal:4:(9) syntax error: currently
  [edit
routing-instances CN2_traffic]
    'currently editing the
configuration:'
      syntax
error
terminal:6:(14) error recovery ignores input until this point:
}
  [edit routing-instances CN2_traffic]
   
'{master}[edit]'
      error recovery ignores input
until this point

load complete (2 errors)
{master}[edit]
[url=http://www.one-tom.com/bbs/mailto:yixun@SCC-GD-SZ-XNT-MAN.RE0]yixun@SCC-GD-SZ-XNT-MAN.RE0[/url]# exit
The configuration has
been changed but not committed
Exit with uncommitted changes? [yes,no] (yes)
no
Exit aborted
{master}[edit]
[url=http://www.one-tom.com/bbs/mailto:yixun@SCC-GD-SZ-XNT-MAN.RE0]yixun@SCC-GD-SZ-XNT-MAN.RE0[/url]# exit configuration-mode
The
configuration has been changed but not committed
Exiting configuration
mode
{master}
[url=http://www.one-tom.com/bbs/mailto:yixun@SCC-GD-SZ-XNT-MAN.RE0]yixun@SCC-GD-SZ-XNT-MAN.RE0[/url]> show cli
CLI
complete-on-space set to on
CLI idle-timeout disabled
CLI
restart-on-upgrade set to on
CLI screen-length set to 25
CLI screen-width
set to 142
CLI terminal is 'vt100'
CLI is operating in enhanced
mode
CLI timestamp disabled
CLI working directory is '/var/home/yixun'
{master}
[url=http://www.one-tom.com/bbs/mailto:yixun@SCC-GD-SZ-XNT-MAN.RE0]yixun@SCC-GD-SZ-XNT-MAN.RE0[/url]>

噢..知道了,    以前还真没有注意过这个

恩恩，这个是比较好的问题呢，我现在终于知道怎么处理了~~~~~

有些东西要是一点点的打出来还真是麻烦

我看晕了le!#sia

b(:min+bi 不懂

高人来解决吧):gao_xing

没点说明吗？rrz()=

sh}:oq% sh}:oq% sh}:oq%

顶一下`````````````````````````

[zol" [zol" [zol"

呵呵。我是看不明白`````````