请教一个问题:  netscreen 25 在CLI 界面里面看到

NetScreen NS-25/50 Boot Loader Version 3.0.0 (Checksum: D1C6421F)
Copyright (c) 1997-2003 NetScreen Technologies, Inc.
Total physical memory: 128MB
    Test - Pass
    Initialization - Done
Model Number: NS-25### SCB Cmd 06 failed ###
### failed to load RU base ###
### failed to configure mac controller ###

Hit any key to run loader
Hit any key to run loader
Hit any key to run loader
Hit any key to run loader
Loading default system image from on-board flash disk...
### file not found ###
Serial Number [0034122002000394]: READ ONLY
HW Version Number [4010]: READ ONLY
Self MAC Address [0010-db2f-bd40]: READ ONLY
Boot File Name [0034122002000394]:
Self IP Address [192.168.2.1]:
TFTP IP Address [192.168.2.22]:     Port 1 xmt unit not in suspend state
    Port 1 xmt unit not in suspend state
    Port 1 xmt unit not in suspend state
    Port 1 xmt unit not in suspend state
    Port 1 xmt unit not in suspend state
    Port 1 xmt unit not in suspend state
里面的OS没有了,现在想灌OS但是第一个端口起不来.请问高手有什么解决办法?

有那位兄弟帮我看看啊?谢谢!

强啊!起不来的话,看看用配置口RESET下

早就试过没有用的!!!!