JunOS默认包含下列路由表：
    inet.0        IPv4 unicast routes
    inet.1        IPv4 multicast routes
    inet.2        IPv4 unicast routes,used by multicast routing protocols to prevent routing loops(Reverse Path Forwarding/RPF)
    inet.3        the egress IP address of a MPLS label switched path (LSP).
    inet.4        information learned using the Multicast Source Discovery Protocol (MSDP).
    inet6.0        IPv6 unicast routes
    mpls.0        MPLS label values are stored
    bgp.l3vpn.0    stores routing information in a Layer 3 virtual private network (VPN) environment     bgp.l2vpn.0    stores routing information in a Layer 2 virtual private network (VPN) environment

juniper 的路由表这么多类型呀,要怎么选哪个才是最好的呢?

偶也不清楚。。。。。

不清楚就学习了,只要自己努力肯定什么都能搞定的.

):gao_xing le!#sia

):gao_xing ):gao_xing

感觉太多类型！不知道如何选择自己所需的路由表，先去了解一下！

这么多啊！！！！！！！！